dmesg - ARMv8 Cortex-A53 - - Raspberry Pi Zero 2 W Rev 1.0
Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 6.6.51+rpt-rpi-v8 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT Debian 1:6.6.51-1+rpt3 (2024-10-08)
KASLR enabled
random: crng init done
Machine model: Raspberry Pi Zero 2 W Rev 1.0
efi: UEFI not found.
Reserved memory: created CMA memory pool at 0x000000000b000000, size 256 MiB
OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
OF: reserved mem: 0x000000000b000000..0x000000001affffff (262144 KiB) map reusable linux,cma
Zone ranges:
DMA [mem 0x0000000000000000-0x000000001bffffff]
DMA32 empty
Normal empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000000000-0x000000001bffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
On node 0, zone DMA: 16384 pages in unavailable ranges
percpu: Embedded 30 pages/cpu s85672 r8192 d29016 u122880
pcpu-alloc: s85672 r8192 d29016 u122880 alloc=30*4096
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Detected VIPT I-cache on CPU0
CPU features: kernel page table isolation forced ON by KASLR
CPU features: detected: Kernel page table isolation (KPTI)
CPU features: detected: ARM erratum 843419
CPU features: detected: ARM erratum 845719
alternatives: applying boot alternatives
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Built 1 zonelists, mobility grouping on. Total pages: 112896
mem auto-init: stack:all(zero), heap alloc:off, heap free:off
Memory: 147344K/458752K available (13440K kernel code, 2212K rwdata, 4268K rodata, 4864K init, 1083K bss, 49264K reserved, 262144K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 43242 entries in 169 pages
ftrace: allocated 169 pages with 4 groups
trace event string verifier disabled
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU event tracing is enabled.
rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Root IRQ handler: bcm2836_arm_irqchip_handle_irq
rcu: srcu_init: Setting srcu_struct sizes based on contention.
arch_timer: cp15 timer(s) running at 19.20MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
pid_max: default: 32768 minimum: 301
LSM: initializing lsm=capability,integrity
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
cgroup: Disabling memory control group subsystem
RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Detected VIPT I-cache on CPU2
CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Detected VIPT I-cache on CPU3
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: 32-bit EL1 Support
CPU features: detected: CRC32 instructions
CPU: All CPU(s) started at EL2
alternatives: applying system-wide alternatives
devtmpfs: initialized
Enabled cp15_barrier support
Enabled setend support
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'step_wise'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 32768 entries
bcm2835-mbox 3f00b880.mailbox: mailbox enabled
raspberrypi-firmware soc:firmware: Attached to firmware from 2024-08-30T19:19:11, variant start
raspberrypi-firmware soc:firmware: Firmware hash is 2808975b80149bbfe86844655fe45c7de66fc078
Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
Modules: 0 pages in range for non-PLT usage
Modules: 517776 pages in range for PLT usage
bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
vgaarb: loaded
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
FS-Cache: Loaded
CacheFiles: Loaded
NET: Registered PF_INET protocol family
IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
TCP bind hash table entries: 4096 (order: 5, 131072 bytes, linear)
TCP: Hash tables configured (established 4096 bind 4096)
MPTCP token hash table entries: 512 (order: 1, 12288 bytes, linear)
UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp-with-tls transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
kvm [1]: IPA Size Limit: 40 bits
kvm [1]: Hyp mode initialized successfully
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=17 bucket_order=0
zbud: loaded
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes
simple-framebuffer 1eaa9000.framebuffer: framebuffer at 0x1eaa9000, 0x151800 bytes
simple-framebuffer 1eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
Console: switching to colour frame buffer device 90x30
simple-framebuffer 1eaa9000.framebuffer: fb0: simplefb registered!
bcm2835-rng 3f104000.rng: hwrng registered
vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
brd: module loaded
loop: module loaded
Loading iSCSI transport class v2.0-870.
usbcore: registered new device driver r8152-cfgselector
usbcore: registered new interface driver r8152
usbcore: registered new interface driver lan78xx
usbcore: registered new interface driver smsc95xx
dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Core Release: 2.80a
Setting default values for core params
Finished setting default values for core params
Freeing initrd memory: 12652K
Using Buffer DMA mode
Periodic Transfer Interrupt Enhancement - disabled
Multiprocessor Interrupt Enhancement - disabled
OTG VER PARAM: 0, OTG VER FLAG: 0
Dedicated Tx FIFOs mode
WARN::dwc_otg_hcd_init:1070: FIQ DMA bounce buffers: virt = ffffffc080b9a000 dma = 0x00000000cb400000 len=9024
FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
dwc_otg: Microframe scheduler enabled
WARN::hcd_init_fiq:496: MPHI regs_base at ffffffc080065000
dwc_otg 3f980000.usb: DWC OTG Controller
dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
Init: Port Power? op_state=1
Init: Power Port (0)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 6.6.51+rpt-rpi-v8 dwc_otg_hcd
usb usb1: SerialNumber: 3f980000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
dwc_otg: FIQ enabled
dwc_otg: NAK holdoff enabled
dwc_otg: FIQ split-transaction FSM enabled
Module dwc_common_port init
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
bcm2835_vchiq 3f00b840.mailbox: there is not valid maps for state default
hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
NET: Registered PF_PACKET protocol family
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Indeed it is in host mode hprt0 = 00021501
serial serial0: tty port ttyAMA1 registered
bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
sdhost: log_buf @ 000000007a682da8 (c57b5000)
mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
of_cfs_init
of_cfs_init: OK
clk: Disabling unused clocks
Freeing unused kernel memory: 4864K
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
mmc0: host does not support reading read-only switch, assuming write-enable
mmc0: Host Software Queue enabled
mmc0: new high speed SDHC card at address aaaa
mmcblk0: mmc0:aaaa SE16G 14.8 GiB
mmcblk0: p1 p2
mmcblk0: mmc0:aaaa SE16G 14.8 GiB (quirks 0x00004000)
mmc1: new high speed SDIO card at address 0001
usb 1-1: new high-speed USB device number 2 using dwc_otg
Indeed it is in host mode hprt0 = 00001101
usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-1: Product: USB2.0 HUB
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.4: new high-speed USB device number 3 using dwc_otg
usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8152, bcdDevice=20.00
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.4: Product: USB 10/100 LAN
usb 1-1.4: Manufacturer: Realtek
usb 1-1.4: SerialNumber: 00E04C680A9D
r8152-cfgselector 1-1.4: reset high-speed USB device number 3 using dwc_otg
r8152 1-1.4:1.0: skip request firmware
r8152 1-1.4:1.0 eth0: v1.12.13
usbcore: registered new interface driver cdc_ether
EXT4-fs (mmcblk0p2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
systemd[1]: System time before build time, advancing clock.
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
systemd[1]: systemd 256.7-1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT +LIBARCHIVE)
systemd[1]: Detected architecture arm64.
systemd[1]: Hostname set to .
systemd[1]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
systemd-ssh-generator[186]: Binding SSH to AF_UNIX socket /run/ssh-unix-local/socket.
systemd-ssh-generator[186]: → connect via 'ssh .host' locally
systemd-sysv-generator[188]: SysV service '/etc/init.d/raspi-config' lacks a native systemd unit file. ~ Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it safe, robust and future-proof. ! This compatibility logic is deprecated, expect removal soon. !
systemd[1]: Queued start job for default target multi-user.target.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target paths.target - Path Units.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target swap.target - Swaps.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
systemd[1]: Mounting tmp.mount - Temporary Directory /tmp...
systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab).
systemd[1]: Starting fake-hwclock-load.service - Restore the current clock...
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
fuse: init (API version 7.39)
systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd[1]: Mounted tmp.mount - Temporary Directory /tmp.
systemd[1]: fake-hwclock-load.service: Deactivated successfully.
systemd[1]: Finished fake-hwclock-load.service - Restore the current clock.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
systemd-journald[219]: Collecting audit messages is disabled.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
systemd[1]: Started systemd-journald.service - Journal Service.
EXT4-fs (mmcblk0p2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.
systemd-journald[219]: Received client request to flush runtime journal.
systemd-journald[219]: /var/log/journal/f4d1c8c153dd4979a19ec91df9eb89f0/system.journal: Realtime clock jumped backwards relative to last journal entry, rotating.
systemd-journald[219]: Rotating system journal.
mc: Linux media interface: v0.10
vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[vc_sm_connected_init]: start
[vc_sm_connected_init]: installed successfully
videodev: Linux video capture interface: v2.00
rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000
rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem
bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
bcm2835-isp bcm2835-isp: Register output node 0 with media controller
bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
bcm2835-isp bcm2835-isp: Register output node 0 with media controller
bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
bcm2835-codec bcm2835-codec: Device registered as /dev/video10
bcm2835-codec bcm2835-codec: Loaded V4L2 decode
bcm2835-codec bcm2835-codec: Device registered as /dev/video11
bcm2835-codec bcm2835-codec: Loaded V4L2 encode
bcm2835-codec bcm2835-codec: Device registered as /dev/video12
bcm2835-codec bcm2835-codec: Loaded V4L2 isp
bcm2835-codec bcm2835-codec: Device registered as /dev/video18
bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
bcm2835-codec bcm2835-codec: Device registered as /dev/video31
bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
cfg80211: Loading compiled-in X.509 certificates for regulatory database
Loaded X.509 cert '[email protected]: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
Loaded X.509 cert '[email protected]: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
Bluetooth: Core ver 2.22
NET: Registered PF_BLUETOOTH protocol family
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: HCI UART driver ver 2.3
Bluetooth: HCI UART protocol H4 registered
Bluetooth: HCI UART protocol Three-wire (H5) registered
hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
Bluetooth: HCI UART protocol Broadcom registered
brcmfmac: F1 signature read @0x18000000=0x1541a9a6
brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
usbcore: registered new interface driver brcmfmac
Console: switching to colour dummy device 80x25
vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
Registered IR keymap rc-cec
rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input0
input: vc4-hdmi HDMI Jack as /devices/platform/soc/3f902000.hdmi/sound/card0/input1
vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
Bluetooth: hci0: BCM: chip id 94
Bluetooth: hci0: BCM: features 0x2e
Bluetooth: hci0: BCM43430A1
Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000
Bluetooth: hci0: BCM43430A1 'brcm/BCM43430A1.hcd' Patch
brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jun 14 2023 07:27:45 version 7.45.96.s1 (gf031a129) FWID 01-70bd2af7 es7
Bluetooth: hci0: BCM: features 0x2e
Bluetooth: hci0: BCM43438A1 37.4MHz Raspberry Pi 3-0141
Bluetooth: hci0: BCM43430A1 (001.002.009) build 0508
Adding 204796k swap on /var/swap. Priority:-2 extents:4 across:409600k SS
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: MGMT ver 1.22
NET: Registered PF_ALG protocol family
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8152 1-1.4:1.0 eth0: carrier on
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
Adding 1048572k swap on /home/cking/swap.img. Priority:-3 extents:18 across:12361728k SS
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
stress-ng-memfd[22102]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
cgroup: fork rejected by pids controller in /user.slice/user-1000.slice/session-1.scope
hrtimer: interrupt took 511198 ns
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled